Jwei SG1625 Autoline Automatic Cutting Line
On request
- Auto Loader and Auto Stacker for continuous, unattended running
- Two modes: precision, creasing on the reverse of the print, and fast
- CCD and rear camera read QR codes and register marks to open the cut file
- Cutting speed up to 2000 mm/s, repeatability under 0.05 mm
- Motion control response 0.00015 s with backlash-free helical gearing
- NFC access control, automatic tool setting and automatic router change
SG1625 cutting table with automatic loader and stacker for unattended running: an 11.15 m line cutting at 2000 mm/s on a 1600 x 2500 mm bed.
Request a quoteWhich size, tools and feeding? Read the guide- Signage & advertising
- Packaging
- Paper
- Textiles
- Leather
About this machine
Jwei SG1625 Autoline Automatic Cutting Line
The SG1625 Autoline is the SG1625 cutting table fitted with an automatic loading system (Auto Loader) and an automatic collection system (Auto Stacker), so the line runs continuously without an operator at the machine. Material is stacked on a pallet in the loader, a camera reads the register marks and QR codes and opens the matching cut file, and the finished pieces are passed to the stacker.
The line works in two modes. In precision mode the sheet is laid printed side down onto the conveyor and a camera underneath reads the codes, so creasing is done on the reverse of the print, which gives a cleaner fold. In fast mode the sheet lies face up and the CCD camera starts the process automatically. In both modes the loader prepares the next sheet while the current one is being cut, so the bed is not left waiting.
Cutting speed reaches 2000 mm/s on a 1600 × 2500 mm effective area, with repeatability under 0.05 mm and material thickness up to 50 mm. Motion control updates in 0.00015 s and runs on a bus controller with an advanced servo system, imported linear guides, feed screws and backlash-free helical gearing; the material is held by vacuum suction. Jobs arrive over an Ethernet port in HP-GL compatible format.
Operator access is controlled by NFC, the tool is set automatically and the router bit is changed automatically, and the line runs at 64 dB. The complete line is rated at 21.3 kVA on a 380 V ±10% supply, measures 2570 × 11150 × 1415 mm and weighs 4,240 kg. It suits packaging and display producers running repeat work where the gain comes from continuous, unattended operation rather than from the cut itself.
Applications
- Continuous, unattended production of cardboard packaging and displays
- Repeat runs with automatic file change by QR code
- Contour cutting to register marks with a CCD or rear camera
- Integrated flows: loading, scanning, cutting and unloading
Technical specifications
Performance
- Fastest speed
- 2000 mm/s
- Repeat precision
- < 0.05 mm
- Motion control response
- 0.00015 s
Working area
- Effective cutting area
- 1600 x 2500 mm
- Maximum cutting thickness
- 50, depending on material and tool mm
Features
- Maximum loading height including pallet
- 650 mm
- Maximum single sheet thickness
- 4 mm
- Maximum single sheet feed weight
- 1 kg
- Maximum loading and unloading size
- 1600 x 2500 mm
- Minimum loading and unloading size
- 297 x 420 mm
Tooling & heads
- Head
- Multi-tool fixing holes, quick-insert holders, plug and play
- Tools supplied
- Electric oscillating knife, drag knife, rotary knife, router module, plotting pen
- Tool change
- Automatic tool setting and automatic router bit change; optional ATC module
Drive & mechanics
- Drive system
- Bus controller, advanced servo system, imported linear guide rail, lead screws, zero-backlash ground helical gearing
- Material hold-down
- Vacuum absorption, six-zone suction
- Table
- Aerospace honeycomb aluminium panel with felt top
- Noise level
- 64 dB
Software & control
- Control system
- M7 series EtherCAT bus controller
- Job recognition
- CCD vision registration with QR-code job classification
- Instruction format
- HP-GL compatible
- Data transmission
- Ethernet port
Power & environment
- Rated capacity
- 21.3 kVA
- Power supply
- 380 V +/- 10%
Safety & certification
- Protection systems
- Internal infrared light grid
- Access control
- NFC operator access control
Dimensions & weight
- Line dimensions
- 2570 x 11150 x 1415 mm
- Total weight
- 4240 kg
Specifications, images and descriptions are provided for general guidance and may change without notice. Configurations, performance figures and supplied items can vary by production batch and market. The binding specification, scope of supply and terms are those set out in the written quotation we issue for your order.
Application details
Recommended for
SG1625 cutting table with automatic loader and stacker for unattended running, cutting at 2000 mm/s on a 1600 × 2500 mm bed.
Series
Jwei
Frequently asked questions
What is the Autoline?
It is the SG1625 cutting table with an Auto Loader and an Auto Stacker, so the line runs continuously without an operator at the machine. Sheets are stacked on a pallet, a camera reads the register marks and QR codes and opens the matching cut file, and finished pieces go to the stacker. The bed is 1600 × 2500 mm, cutting at up to 2000 mm/s with repeatability under 0.05 mm.
What is the difference between precision and fast mode?
Precision mode lays the sheet printed side down and a camera underneath reads the codes, so creasing is done on the reverse of the print for a cleaner fold. Fast mode runs the sheet face up and the CCD camera starts the process automatically. In both, the loader prepares the next sheet while the current one is cut.
Which sheets can the loader handle?
Sheets from 297 × 420 mm up to 1600 × 2500 mm, each up to 4 mm thick and 1 kg, from a stack up to 650 mm high including the pallet. The table itself cuts up to 50 mm depending on material and tool, but automatic feeding is limited to the 4 mm and 1 kg figures. Send us your sheet specification and we will check it.
What does the line need on site?
A 380 V ±10% supply with a rated capacity of 21.3 kVA, and a floor area for a line measuring 2570 × 11150 × 1415 mm with a total weight of 4240 kg. Running noise is 64 dB. Allow pallet access at both the loading and stacking ends.
Which tools does it use, and how are they set?
The head takes multiple tools in quick-insert, plug-and-play holders. Supplied are an electric oscillating knife, drag knife, rotary knife, router module and plotting pen. Tool setting and router bit change are automatic, with an ATC module optional. Material is held by vacuum across six suction zones on an aluminium honeycomb bed.
How are jobs sent and controlled?
Jobs arrive over Ethernet in HP-GL compatible format. CCD vision registration with QR-code classification picks the right file for each sheet, so repeat runs change file automatically. The line runs on an M7 series EtherCAT bus controller, operator access is controlled by NFC and the working area is protected by an internal infrared light grid.