AEON · Accessories

AEON R7C13 roller rotary device

In stock

  • Full-circumference engraving on straight-sided cylinders
  • Workpiece rests on two driven, O-ring rollers — nothing to clamp
  • Quickest setup of the AEON rotaries
  • For AEON Redline Mira and Nova

Roller rotary for engraving straight-sided cylinders — tumblers, bottles and pipes — with the quickest setup of the AEON rotaries.

Request a quote
  • Glass
  • Wood & MDF
  • Acrylic

About this accessory

AEON roller rotary device

A roller rotary for engraving the full circumference of straight-sided cylinders — tumblers, bottles, pipes. The workpiece simply rests on two driven rollers fitted with rubber O-rings, which turn it under the laser head. Nothing is clamped, so setup is the quickest of the AEON rotaries: lay the piece on the rollers and start the job.

Choosing between the rotaries

Rollers suit pieces with a constant diameter. For tapered or stemmed items — wine glasses, necked bottles, short pieces — the R7C14 chuck rotary holds the piece on its own axis. If you need both, the R7G12 Octopus Duo combines rollers and chuck in one unit.

▶ Watch it work (YouTube)

Technical specifications

Operation

Holding method
Workpiece rests on two driven rollers with rubber O-rings; nothing is clamped
Typical work
Straight-sided cylinders: tumblers, bottles, pipes

Compatibility

Machines
AEON Redline Mira and Nova

Specifications, images and descriptions are provided for general guidance and may change without notice. Configurations, performance figures and supplied items can vary by production batch and market. The binding specification, scope of supply and terms are those set out in the written quotation we issue for your order.

Application details

Recommended for

Engraving tumblers, bottles, pipes and other straight-sided cylinders.

Series

Accessories

Frequently asked questions

What can it engrave?

The full circumference of straight-sided cylinders: tumblers, bottles and pipes. The piece turns under the laser head, so the engraving can run all the way round instead of being limited to the face you can lay flat on the bed.

Which machines does it fit?

The AEON Redline Mira and Nova. It has the quickest setup of the AEON rotaries, because the piece only rests on the rollers and there is nothing to clamp. If your machine is not a Redline Mira or Nova, send us the model and we will tell you which rotary to use.

How is the workpiece held?

It is not clamped at all. The piece rests on two driven rollers fitted with rubber O-rings, which turn it under the laser head. That makes it the quickest of the AEON rotaries to set up: lay the piece on the rollers and start the job.

Should we choose the roller or the chuck rotary?

Rollers suit pieces with a constant diameter. For tapered or stemmed items, such as wine glasses, necked bottles or short pieces, the R7C14 chuck rotary holds the piece on its own axis. If you need both, the R7G12 Octopus Duo combines rollers and chuck in one unit. Send us examples of what you engrave and we will recommend one.