AEON R7C14 chuck rotary device
In stock
- Full-circumference engraving on round objects
- Workpieces Ø5 – 75 mm, 20 – 300 mm long
- 292 mm useful stroke, 55 mm centre height
- NEMA 23 two-phase stepper drive, 1:1.6 reduction
Chuck rotary for full-circumference engraving of glasses, bottles, mugs, bracelets and tumblers.
Request a quote- Glass
- Leather
- Wood & MDF
About this accessory
AEON chuck rotary device
A chuck rotary for engraving the full circumference of round objects — glasses, bottles, mugs, bracelets and tumblers. The workpiece is held in the chuck rather than on rollers, so it stays concentric and the seam where the engraving closes stays clean.
Capacity
Workpieces from 20 to 300 mm long and Ø5 to Ø75 mm, with a useful stroke of 292 mm and a centre height of 55 mm.
Drive
A two-phase stepper motor 57 (NEMA 23) at a rated current of 5.6 A, through a 1:1.6 reduction ratio.
Choosing between the rotaries
The jaws hold one end of the piece and an adjustable centre supports the other, so it turns on its own axis — this keeps necked bottles and stemmed glasses running true. If you also need rollers for straight-sided cylinders, the R7G12 Octopus Duo combines both in one unit.
Technical specifications
Capacity
- Workpiece length
- 20 – 300 mm
- Workpiece diameter
- Ø5 – 75 mm
- Useful stroke
- 292 mm
- Centre height
- 55 mm
Mechanics
- Motor
- Two-phase stepper 57 (NEMA 23)
- Rated current
- 5.6 A
- Reduction ratio
- 1:1.6
Dimensions & weight
- Dimensions
- 552 × 121 × 131 mm
- Weight
- 5.7 kg
Specifications, images and descriptions are provided for general guidance and may change without notice. Configurations, performance figures and supplied items can vary by production batch and market. The binding specification, scope of supply and terms are those set out in the written quotation we issue for your order.
Application details
Recommended for
Personalisation of glasses, bottles, mugs, bracelets and tumblers.
Series
Accessories
Frequently asked questions
What sizes of workpiece does it take?
Pieces from 20 to 300 mm long and from Ø5 to Ø75 mm. The useful stroke is 292 mm and the centre height is 55 mm. If a piece is close to these limits, send us its dimensions and we will check it before you order.
What can we engrave with it?
The full circumference of round objects: glasses, bottles, mugs, bracelets and tumblers. Because the jaws hold one end and an adjustable centre supports the other, it also keeps necked bottles and stemmed glasses running true.
Why use a chuck instead of rollers?
Because the piece turns on its own axis. It is held in the chuck rather than resting on rollers, so it stays concentric and the seam where the engraving closes stays clean. If you also need rollers for straight-sided cylinders, the R7G12 Octopus Duo combines both in one unit.
How is it driven, and how big is it?
A two-phase stepper motor 57 (NEMA 23) at a rated current of 5.6 A drives the chuck through a 1:1.6 reduction ratio. The unit measures 552 × 121 × 131 mm and weighs 5.7 kg.