PURE-AIR PA-FGS2400 Fume & Dust Extractor
In stock
- 2400 m³/h airflow
- PTFE mineral-powder pre-filter for sticky wood dust
- HEPA H14 filtration, 99.99% @ 0.3 µm
- Activated carbon stage for VOC and odour
- PPS standard control
Industrial fume extraction unit for wood, 2400 m³/h. Wood, plywood, MDF, chipboard. PPS standard control.
Request a quoteWhich model fits your machine? Read the guide- Laser cutting
- Laser engraving
- CNC routing
- Wood & MDF
- Sticky dust
About this machine
The PA-FGS2400 is the largest model of PURE-AIR's FGS series — the range built specifically for the sticky dust produced when a CO2 laser cuts wood, plywood and MDF. Resin and binder in the board turn the smoke tacky, and it cakes onto an ordinary pleated pre-filter within weeks. In the FGS series the first stage is a PTFE cartridge loaded with natural mineral powder: the dust sits on the powder rather than bonding to the media, and it releases when the cartridge is cleaned. Behind it, a HEPA H14 stage and an activated carbon bed deal with the sub-micron smoke and the burnt-wood smell. Airflow: 2400 m³/h.
Filtration
- PTFE cartridge pre-filter loaded with natural mineral powder - releases sticky, resinous dust instead of blinding
- H14 deeppleat filter, 99.99% @ 0.3 um
- Treated activated carbon stage for burnt-wood odour and VOC
Recommended for
- Large-format CO2 laser cutters working wood and MDF
- CNC routers and nesting machines working wood and MDF
- Sign-making and furniture workshops
Why not the FS series
An FS unit will extract the same volume of air, but its F9 pre-filter is not designed for resinous dust and will need replacing far more often. On wood and MDF the FGS pays for itself in consumables.
Power, dimensions and weight for this model are available from our team.
- Clean air out · brushless fanpulls through every stage
- Stage 3 · activated carbonholds VOC and odour
- Stage 2 · HEPA H1499.99% @ 0.3 µm
- Stage 1 · PTFE cartridgesticky resinous dust releases
- Contaminated air inducted from the machine; dust drawer emptied from the front
Technical specifications
- Airflow
- 2400 m³/h
- Pre-filter
- PTFE cartridge pre-filter loaded with natural mineral powder - releases sticky, resinous dust instead of blinding
- Main filter
- H14 deeppleat filter, 99.99% @ 0.3 um
- Activated carbon
- Yes
- Control system
- PPS standard control
Specifications, images and descriptions are provided for general guidance and may change without notice. Configurations, performance figures and supplied items can vary by production batch and market. The binding specification, scope of supply and terms are those set out in the written quotation we issue for your order.
Application details
Materials
Wood, plywood, MDF, chipboard; also engraved hardwood
Series
FGS
Frequently asked questions
What is it for?
The PA-FGS2400 is the largest model in PURE-AIR's FGS series, built for the sticky dust a CO2 laser produces on wood, plywood, MDF and chipboard. It suits large-format CO2 laser cutters working wood and MDF, CNC routers and nesting machines, and sign-making and furniture workshops.
How much air does it move?
2400 m³/h. It is the largest model in the FGS series and is recommended for large-format CO₂ laser cutters, CNC routers and nesting machines working wood and MDF. Maximum negative pressure is not listed for this model, so send us your machine model, duct run and number of extraction points and we will confirm it fits.
Why not use an FS unit on wood?
An FS unit moves the same volume of air, but its F9 pre-filter is not designed for resinous dust and will need replacing far more often. Resin and binder in the board make the smoke tacky, and it cakes onto an ordinary pleated pre-filter within weeks.
How does the filtration work?
The first stage is a PTFE cartridge loaded with natural mineral powder: the dust sits on the powder rather than bonding to the media, and it releases when the cartridge is cleaned. Behind it, an H14 deeppleat filter (99.99% @ 0.3 µm) and a treated activated carbon stage deal with sub-micron smoke and the burnt-wood smell.
What does it need on site?
Power, dimensions and weight for this model are not published yet; our team will give you them for your quote. The unit has PPS standard control. Send us your laser model and a sketch of the room and we will check supply, floor space and duct route.