Jwei LP360 Laser Label Cutting System
On request
- 300 W metal RF laser source rated at 20,000 h or more
- Cutting speed up to 80 m/min, accuracy ± 0.1 mm
- 350 mm cutting width with unlimited cutting length
- 4K CCD vision switching automatically between QR and barcodes
- Aluminium alloy table with negative-pressure hold-down
- Modular: creasing, perforating, numbering, varnishing, hot foil
Laser label cutter with a 300 W metal RF source, 350 mm cutting width and speeds of up to 80 m/min at ± 0.1 mm accuracy.
Request a quote- Labels
- Packaging
- Laser cutting
About this machine
Jwei LP360 Laser Label Cutting System
The LP360 cuts labels with a laser rather than a knife or a die. A 300 W metal RF source works at up to 80 m/min with a cutting accuracy of ± 0.1 mm across a working width of up to 350 mm, and the cutting length is unlimited, so the repeat is set by the artwork rather than by the circumference of a tool. The web is held on an aluminium alloy table under negative pressure, which keeps thin face stock flat and in position while the beam works.
The design is modular and takes a number of further processing stations: creasing, perforating, engraving, consecutive numbering, flexographic printing, varnishing and hot foil stamping. That allows a single line to produce a finished decorated label rather than handing the roll on to another machine.
Registration uses a 4K industrial CCD camera that switches automatically between QR codes and barcodes, with automatic correction of edge deviation. Rewinding, sheeting and slitting are automatic, as is waste collection. Files are taken in AI, PLT, DXF and DWG. An imported galvanometer and a three-dimensional dynamic system drive the beam, under the manufacturer's own cutting control system.
Services are a three-phase five-wire 380 V / 50 Hz supply, 15 kW for the machine and 3 kW for the water chiller, and compressed air above 0.4 MPa, free of water and oil. Unwind and rewind take rolls up to 500 mm in diameter. Including the sheeting section the machine measures 1950 × 5500 × 1850 mm and weighs 4000 kg. The laser source is rated at 20,000 hours or more.
The manufacturer states that speed and accuracy depend on the material and the application, so both figures are best confirmed against a sample of the actual stock. The machine suits label converters working with materials that dull or deform under a knife — thin films, PET and protective films — and those needing shapes that no standard die covers.
Applications
- Paper self-adhesive labels, wine labels and custom shapes
- PET materials, films, protective films and industrial tapes
- Vehicle decals and labels for electronic products
- RFID labels and general self-adhesive label production
Technical specifications
Performance
- Maximum cutting speed
- ≤ 80 m/min
- Cutting accuracy
- ± 0.1 mm
Working area
- Maximum cutting width
- 350 mm
- Cutting length
- Unlimited
- Feed width
- 350 mm
- Unwind / rewind diameter
- 500 / 500 mm
Tooling & heads
- Laser source
- 300, metal RF laser W
- Laser source lifetime
- ≥ 20,000 h
Drive & mechanics
- Cutting platform
- Aluminium alloy table with negative pressure
- Deviation correction
- Automatic edge correction
Software & control
- Vision system
- 4K industrial CCD camera, automatic QR code / barcode switching
- Accepted file formats
- AI, PLT, DXF, DWG
Power & environment
- Power supply
- Three-phase, five-wire, 380 V / 50 Hz
- Machine power
- 15 kW
- Water chiller power
- 3 kW
- Compressed air pressure
- > 0.4, free of water and oil MPa
Dimensions & weight
- Machine dimensions (W × L × H)
- 1950 × 5500 × 1850, including the sheeting section mm
- Weight
- 4000 kg
Specifications, images and descriptions are provided for general guidance and may change without notice. Configurations, performance figures and supplied items can vary by production batch and market. The binding specification, scope of supply and terms are those set out in the written quotation we issue for your order.
Application details
Recommended for
Laser label cutter with a 300 W metal RF source, 350 mm cutting width and speeds of up to 80 m/min at ± 0.1 mm accuracy.
Series
Jwei
Frequently asked questions
Why cut labels with a laser instead of a knife?
For materials that dull or deform under a knife, such as thin films, PET and protective films, and for shapes no standard die covers. Cutting length is unlimited, so the repeat is set by the artwork rather than the circumference of a tool. The web is held flat on an aluminium alloy table under negative pressure while the beam works.
What can it produce?
Paper self-adhesive labels, wine labels and custom shapes; PET materials, films, protective films and industrial tapes; vehicle decals; labels for electronic products; and RFID labels. The source is a 300 W metal RF laser, cutting webs up to 350 mm wide.
How fast and accurate is it?
Up to 80 m/min with cutting accuracy of ±0.1 mm. The manufacturer states that both depend on the material and application, so we confirm them against your material. Send us a sample of the material and a typical file and we will tell you what to expect.
Which finishing stations can be added?
The design is modular. Further stations for creasing, perforating, engraving, consecutive numbering, flexographic printing, varnishing and hot foil stamping can be added, so one line can deliver a finished, decorated label instead of passing the roll to another machine.
How does registration work, and which files does it take?
A 4K industrial CCD camera switches automatically between QR codes and barcodes and corrects edge deviation automatically. Files are accepted in AI, PLT, DXF and DWG. Rewinding, sheeting, slitting and waste collection are automatic, with unwind and rewind rolls up to 500 mm in diameter.
What does it need on site?
A three-phase, five-wire 380 V / 50 Hz supply for 15 kW to the machine plus 3 kW for the water chiller, and compressed air above 0.4 MPa, free of water and oil. Including the sheeting section it measures 1950 × 5500 × 1850 mm and weighs 4000 kg.