Jwei IL330 Digital Label Die-Cutter
On request
- 6 to 9 cutting heads, configurable to the workload
- Processing speed up to 20 m/min
- CCD registration, 0.2 mm correction and ± 0.02 mm repeatability
- Automatic knife pressure adjustment
- Laminating, waste stripping, missing-label detection and slitting
- Single-casting die-cutting unit for rigidity
Digital die-cutter for self-adhesive labels with 330 mm cutting width, 6 to 9 heads, up to 20 m/min and ± 0.02 mm repeatability.
Request a quote- Labels
- Packaging
About this machine
IL330 Digital Label Die-Cutter
The IL330 is an integrated digital solution for cutting self-adhesive labels. Depending on configuration it carries six to nine cutting heads, and it performs die cutting, sheeting, roll-to-roll and roll-to-sheet processing in one automated flow, so a printed roll leaves the line as finished labels without an intermediate handling stage.
Registration is by CCD, with positioning noticeably faster than the previous generation, reading QR codes, colour marks and barcodes. Deviations are corrected automatically to 0.2 mm, cutting accuracy is ± 0.1 mm and repeatability ± 0.02 mm — close enough for the tight bleed allowances typical of cosmetic and pharmaceutical labels.
Knife pressure is adjusted automatically, which keeps the cut to the liner and not through it as the material or the blade condition changes. Laminating, waste stripping, missing-label detection and slitting are all built into the flow, and the die-cutting unit is a single casting, which keeps the frame rigid under the load of several heads working at speed.
The line takes material up to 350 mm wide with a maximum cutting width of 330 mm, rolls up to 500 mm in diameter, and repeat lengths from 10 mm up to 1200 mm, at a processing speed of up to 20 m/min. Cutting data is accepted directly in HPGL, DXF, AI, PDF and CF2. Supply is AC 220 V at 50/60 Hz with an installed power of 7.1 kVA, plus compressed air at 0.6 MPa; the machine measures 2000 × 1150 × 1600 mm and weighs 1500 kg.
It suits label printers running short and medium quantities who want die cutting straight from the file, without ordering and storing a forme for every shape.
Applications
- Short and medium runs of self-adhesive labels
- Die cutting straight from file, without a cutting forme
- Roll-to-roll and roll-to-sheet converting
- Laminating, waste stripping, slitting and sheeting
Technical specifications
Performance
- Maximum processing speed
- 20 m/min
- Cutting accuracy
- ± 0.1 mm
- Repeatability
- ± 0.02 mm
- Automatic deviation correction
- 0.2 mm
Working area
- Maximum material width
- 350 mm
- Maximum cutting width
- 330 mm
- Maximum single repeat length
- 1200 mm
- Minimum single repeat length
- 10 mm
- Maximum roll diameter
- 500 mm
Tooling & heads
- Cutting heads
- 6 – 9
Drive & mechanics
- Working mode
- Roll-to-roll / roll-to-sheet
- Integrated functions
- Die cutting, sheeting, laminating, waste stripping, missing-label detection, slitting
- Die-cutting unit
- Single integral casting
Software & control
- Registration system
- CCD — QR code, colour mark, barcode
- Accepted file formats
- HPGL, DXF, AI, PDF, CF2
Power & environment
- Supply voltage
- AC 220 V, 50/60 Hz
- Installed power
- 7.1 kVA
- Compressed air pressure
- 0.6 MPa
Dimensions & weight
- Machine dimensions
- 2000 × 1150 × 1600 mm
- Weight
- 1500 kg
Specifications, images and descriptions are provided for general guidance and may change without notice. Configurations, performance figures and supplied items can vary by production batch and market. The binding specification, scope of supply and terms are those set out in the written quotation we issue for your order.
Application details
Recommended for
Digital die-cutter for self-adhesive labels with 330 mm cutting width, 6 to 9 heads, up to 20 m/min and ± 0.02 mm repeatability.
Frequently asked questions
What does the IL330 do?
It turns a printed roll of self-adhesive labels into finished labels in one automated flow, cutting straight from the file without a cutting forme. It handles die cutting, sheeting, roll-to-roll and roll-to-sheet work, with laminating, waste stripping, missing-label detection and slitting built in. It suits short and medium runs where ordering and storing a forme for every shape does not pay.
What roll and label sizes does it take?
Material up to 350 mm wide, with a maximum cutting width of 330 mm, and rolls up to 500 mm in diameter. Repeat lengths run from 10 mm up to 1200 mm. Processing speed is up to 20 m/min.
How accurate is the registration?
A CCD system reads QR codes, colour marks and barcodes and corrects deviation automatically to 0.2 mm. Cutting accuracy is ±0.1 mm and repeatability ±0.02 mm, close enough for the tight bleed allowances on cosmetic and pharmaceutical labels.
How many cutting heads do we need?
The IL330 is configured with six to nine heads, depending on the workload. Send us your typical label sizes, shapes and run lengths and we will recommend the number of heads for your production.
Which file formats does it accept?
Cutting data goes in directly as HPGL, DXF, AI, PDF or CF2, so you die cut straight from file without ordering a forme. If you work in another format, send us a sample file and we will check how it can be brought in.
How does it avoid cutting through the liner?
Knife pressure is adjusted automatically, which keeps the cut in the face material and off the liner as the material or blade condition changes. The die-cutting unit is a single integral casting, which keeps the frame rigid while several heads work at speed.
What does it need on site?
An AC 220 V, 50/60 Hz supply with 7.1 kVA installed power, and a compressed air line at 0.6 MPa. The machine measures 2000 × 1150 × 1600 mm and weighs 1500 kg, so plan a level floor and handling equipment for delivery and leave room to load rolls up to 500 mm in diameter.