Hanma HT · handheld fibre laser welder

Hanma HT welding parameters

The factory presets of the current controller for each model: these are the values the controller loads when you choose the metal and the thickness. Use them as starting values and fine-tune them on your own parts, because fit-up, shielding gas, travel speed and focus all change the result.

Request a quote Hanma HT product page

What the presets cover

Thickness range in the factory presets, per model and metal.

	HT15001500 W	HT20002000 W	HT30003000 W
Stainless steel	0.5–3 mm	0.5–4 mm	1–3.5 mm
Carbon steel	0.5–3 mm	0.5–4 mm	1–3.5 mm
Galvanised steel	—	—	1–3.5 mm
Aluminium	0.5–2 mm	0.5–3 mm	1–3.5 mm
Brass	—	0.5–2 mm	—
Presets	22	34	24

What the columns mean

Peak power (Power on the HT3000): the share of the laser’s rated power, in %.
PWM ratio (Duty cycle on the HT3000): the share of each pulse period the laser is on; 100 % means continuous output.
PWM frequency (Frequency on the HT3000): how many times per second the laser output is pulsed, in Hz.
Scan frequency (Wobble frequency on the HT3000): how fast the beam oscillates across the seam, in Hz.
Weld width: the width of the sweep, in mm.
Wire speed: how fast the filler wire is fed, in mm/s; 0 means the 0.5 mm sheet is welded without wire. The HT3000 presets have no wire speed.

Before you weld

Shielding gas: argon or nitrogen, 15–30 L/min.
Aluminium needs exact focus and clean edges.
For aluminium, use a copper contact tip one size larger than the wire: a 1.2 tip for 1.0 wire, a 1.6 tip for 1.2 wire.
You can save your own parameter groups: 9 on the HT1500 and HT2000, 6 on the HT3000.

HT1500 · 1500 W

Presets: 22 · Stainless steel, Carbon steel, Aluminium

Stainless steel · HT1500

Thickness	Peak power%	PWM ratio%	PWM freq.Hz	Scan freq.Hz	Weld widthmm	Wire speedmm/s
0.5 mm	23	100	1000	30	1.5	0
0.8 mm	30	100	1000	30	2.5	18
1 mm	50	100	1000	30	2	14
1.2 mm	40	100	1000	40	3	15
1.5 mm	40	100	1000	60	3	13
2 mm	39	100	1000	30	3	10
2.5 mm	50	100	1000	40	3.5	10
3 mm	43	100	1000	30	4.5	10

Carbon steel · HT1500

Thickness	Peak power%	PWM ratio%	PWM freq.Hz	Scan freq.Hz	Weld widthmm	Wire speedmm/s
0.5 mm	23	100	1000	30	1.5	0
0.8 mm	33	100	1000	30	2.5	18
1 mm	35	100	1000	30	3	16
1.2 mm	38	100	1000	30	3	15
1.5 mm	40	100	1000	30	3	12
2 mm	50	100	1000	30	4	12
2.5 mm	70	100	1000	30	4	10
3 mm	55	100	1000	30	5	10

Aluminium · HT1500

Thickness	Peak power%	PWM ratio%	PWM freq.Hz	Scan freq.Hz	Weld widthmm	Wire speedmm/s
0.5 mm	40	100	1000	40	1.5	0
0.8 mm	45	100	1000	40	2.5	18
1 mm	60	100	1000	45	2.5	14
1.2 mm	55	100	1000	45	2.5	13
1.5 mm	70	100	1000	40	3	12
2 mm	75	100	1000	45	3	10

HT2000 · 2000 W

Presets: 34 · Stainless steel, Carbon steel, Aluminium, Brass

Stainless steel · HT2000

Thickness	Peak power%	PWM ratio%	PWM freq.Hz	Scan freq.Hz	Weld widthmm	Wire speedmm/s
0.5 mm	17	100	1000	30	1.5	0
0.8 mm	22	100	1000	30	2	18
1 mm	30	100	1000	30	2	14
1.2 mm	28	100	1000	30	3	15
1.5 mm	30	100	1000	30	3	12
2 mm	39	100	1000	30	3	12
2.5 mm	40	100	1000	45	3.5	10
3 mm	43	100	1000	30	4	10
3.5 mm	55	100	1000	30	4.5	8
4 mm	53	100	1000	30	5	6

Carbon steel · HT2000

Thickness	Peak power%	PWM ratio%	PWM freq.Hz	Scan freq.Hz	Weld widthmm	Wire speedmm/s
0.5 mm	17	100	1000	30	1.5	0
0.8 mm	22	100	1000	30	2	18
1 mm	30	100	1000	30	2	16
1.2 mm	25	100	1000	30	2.5	15
1.5 mm	30	100	1000	35	3	12
2 mm	45	100	1000	30	3	12
2.5 mm	50	100	1000	40	3.5	10
3 mm	55	100	1000	30	4	10
3.5 mm	65	100	1000	30	4.5	8
4 mm	70	100	1000	30	4.5	6

Aluminium · HT2000

Thickness	Peak power%	PWM ratio%	PWM freq.Hz	Scan freq.Hz	Weld widthmm	Wire speedmm/s
0.5 mm	32	100	1000	30	1.5	0
0.8 mm	32	100	1000	30	1.8	18
1 mm	40	100	1000	30	2	15
1.2 mm	36	100	1000	35	2	13
1.5 mm	40	100	1000	40	3	12
2 mm	50	100	1000	30	3	10
2.5 mm	55	100	1000	40	4	12
3 mm	60	100	1000	40	4	10

Brass · HT2000

Thickness	Peak power%	PWM ratio%	PWM freq.Hz	Scan freq.Hz	Weld widthmm	Wire speedmm/s
0.5 mm	30	100	1000	30	1.5	0
0.8 mm	32	100	1000	30	1.8	12
1 mm	35	100	1000	30	2	12
1.2 mm	38	100	1000	35	2	10
1.5 mm	45	100	1000	35	2.5	8
2 mm	55	100	1000	35	3	8

HT3000 · 3000 W

Presets: 24 · Stainless steel, Carbon steel, Galvanised steel, Aluminium

Stainless steel · HT3000

Thickness	Power%	Duty cycle%	FrequencyHz	Wobble freq.Hz	Weld widthmm
1 mm	18	100	3000	16	1.6
1.5 mm	23	100	3000	18	2
2 mm	33	100	3000	16	2.2
2.5 mm	36	100	3000	14	2.4
3 mm	50	100	3000	12	2.6
3.5 mm	56	100	3000	10	3

Carbon steel · HT3000

Thickness	Power%	Duty cycle%	FrequencyHz	Wobble freq.Hz	Weld widthmm
1 mm	18	100	3000	20	2
1.5 mm	23	100	3000	18	2
2 mm	33	100	3000	16	2.2
2.5 mm	36	100	3000	14	2.4
3 mm	50	100	3000	12	2.6
3.5 mm	56	100	3000	10	3

Galvanised steel · HT3000

Thickness	Power%	Duty cycle%	FrequencyHz	Wobble freq.Hz	Weld widthmm
1 mm	18	100	3000	20	2
1.5 mm	23	100	3000	18	2
2 mm	33	100	3000	16	2.2
2.5 mm	36	100	3000	14	2.4
3 mm	50	100	3000	12	2.6
3.5 mm	56	100	3000	10	3

Aluminium · HT3000

Thickness	Power%	Duty cycle%	FrequencyHz	Wobble freq.Hz	Weld widthmm
1 mm	20	100	3000	26	1.8
1.5 mm	26	100	3000	18	2
2 mm	33	100	3000	16	2
2.5 mm	36	100	3000	14	2
3 mm	50	100	3000	12	2
3.5 mm	56	100	3000	10	2.2

Send us your metal and thickness

Tell us which metals and thicknesses you weld most often and we will recommend the right HT model in your offer.

Request a quote Hanma HT product page