Jwei SG Series Digital Cutting Table
On request
- Two or three tool heads, with automatic tool and bit change
- 2000 mm/s, repeat precision better than 0.05 mm
- Four bed sizes from 1600 x 1200 to 3200 x 3200 mm
- Cutting, creasing, drawing and routing in one pass
- Camera registration with QR-code job classification for mixed beds
- Aerospace aluminium honeycomb bed with optional zoned vacuum
- Runs without a PC: independent control platform with touch screen
Flatbed cutter with two or three tool heads, running at 2000 mm/s on beds from 1600 x 1200 to 3200 x 3200 mm.
Request a quoteWhich size, tools and feeding? Read the guide- Signage & advertising
- Packaging
- Paper
- Textiles
- Leather
Configurations
| Configuration | Differences | Availability |
|---|---|---|
| SG1612On request | Effective cutting area: 1600 x 1200 mm · Machine dimensions: 2570 x 2080 x 1415 mm · Power: 14 kW | On request |
| SG1625On request | Effective cutting area: 1600 x 2500 mm · Machine dimensions: 2570 x 3380 x 1415 mm · Power: 12 kW with two heads, 14 kW with three | On request |
| SG2132On request | Effective cutting area: 2100 x 3200 mm · Machine dimensions: 3160 x 4108 x 1415 mm · Weight: 1720 kg · Power: 12.2 kVA with two heads, 14.4 kVA with three | On request |
| SG3232On request | Effective cutting area: 3200 x 3200 mm · Machine dimensions: 3260 x 4080 x 1415 mm · Weight: 1670 kg · Power: 27 kVA | On request |
About this machine
Jwei SG Series Digital Cutting Table
The SG is the series where the automation becomes the point. The head carries two or three tools at once and changes them without the operator: routing, chamfering and polishing run one after another in a single job, and an automatic tool changer and bit changer are available so a mixed job does not stop between processes. On a table that runs at 2000 mm/s, the time saved is in the changes, not in the travel.
The range is built in four bed sizes on the same platform: the SG1612 at 1600 x 1200 mm, the SG1625 at 1600 x 2500 mm, the SG2132 at 2100 x 3200 mm and the SG3232 at 3200 x 3200 mm, so the bed can be chosen to match the sheet the shop actually buys rather than the nearest size up.
Motion is by servo through imported linear guides, lead screws and zero-backlash ground helical gearing. Repeat precision is better than 0.05 mm and the machine cuts to 50 mm depending on material and tool. Material sits on an aerospace-grade aluminium honeycomb bed under vacuum, with zoned suction available.
Printed work is registered by camera, with a QR-code module that classifies jobs so several different designs can go on the bed at once and each is cut to its own file. Control is through an independent platform with a touch-screen interface, so the machine does not need a PC beside it; instructions are HP-GL compatible over Ethernet, at a resolution selectable between 0.025, 0.01 and 0.1 mm.
An internal infrared light grid protects the working area. Supply is 380 V, from 12 kW on the SG1625 up to 27 kVA on the SG3232.
For a fully unattended line, the SG1625 is also built with automatic loading and unloading — that configuration is listed separately.
Applications
- Advertising and signage: KT board, PVC foam, aluminium-composite, acrylic, self-adhesive
- Packaging: cardboard, greyboard, corrugated, honeycomb board
- Colour box and carton sampling and short runs
- Display and POS production
- Foam, EPE and EVA parts
- Mixed jobs needing cutting, creasing, drawing and routing in one pass
Technical specifications
Performance
- Fastest speed
- 2000 mm/s
- Repeat precision
- < 0.05 mm
- Software resolution
- 0.025 / 0.01 / 0.1, selectable mm
Working area
- Effective cutting area, SG1612
- 1600 x 1200 mm
- Effective cutting area, SG1625
- 1600 x 2500 mm
- Effective cutting area, SG2132
- 2100 x 3200 mm
- Effective cutting area, SG3232
- 3200 x 3200 mm
- Maximum cutting thickness
- 50, depending on material and tool mm
Materials
- Advertising media
- ABS board, PVC board, space board, aluminium-composite board, lamp sheet, PVC foam board, KT board, acrylic, magnetic sticker, self-adhesive vinyl
- Packaging media
- Cardboard, corrugated, greyboard, PVC and PET, EPE and EVA, hollow sheet, honeycomb panel
Tooling & heads
- Tool heads
- 2 or 3 heads, multi-tool fixing holes, quick-insert holders, plug and play; cutting, creasing, drawing and routing in one
- Tools supplied
- Electric oscillating knife, drag knife, rotary knife, router module, plotting pen
- Tool change
- Optional ATC module with automatic tool and bit change; automatic tool calibration for cutting and creasing depth
Drive & mechanics
- Drive system
- Bus controller, advanced servo system, imported linear guide rail, lead screws, zero-backlash ground helical gearing
- Material hold-down
- Vacuum absorption, zoned suction optional
- Table
- Aerospace-grade aluminium honeycomb panel with felt top
Software & control
- Control system
- Independent control platform with touch-screen interface, no computer required
- Positioning
- Camera positioning with QR-code job classification
- Instruction format
- HP-GL compatible
- Data transmission
- Ethernet port
Power & environment
- Power, SG1625
- 12 with two heads, 14 with three heads kW
- Power, SG2132
- 12.2 with two heads, 14.4 with three heads kVA
- Power, SG3232
- 27 kVA
- Power supply
- 380 V +/- 10%
Safety & certification
- Protection systems
- Internal infrared light grid, anti-collision design, emergency stop
Dimensions & weight
- Machine dimensions, SG1612
- 2570 x 2080 x 1415 mm
- Machine dimensions, SG1625
- 2570 x 3380 x 1415 mm
- Machine dimensions, SG2132
- 3160 x 4108 x 1415 mm
- Machine dimensions, SG3232
- 3260 x 4080 x 1415 mm
- Weight, SG2132
- 1720 kg
- Weight, SG3232
- 1670 kg
Specifications, images and descriptions are provided for general guidance and may change without notice. Configurations, performance figures and supplied items can vary by production batch and market. The binding specification, scope of supply and terms are those set out in the written quotation we issue for your order.
Application details
Recommended for
Conveyor-fed flatbed cutter in three bed sizes up to 3200 × 3000 mm, running at 2000 mm/s on material up to 50 mm thick.
Series
Jwei
Frequently asked questions
What does the multi-head setup do for us?
The head carries two or three tools at once, so cutting, creasing, drawing and routing run in one pass. Supplied tools are an electric oscillating knife, drag knife, rotary knife, router module and plotting pen. An optional ATC module changes tools and bits automatically, and tool calibration sets cutting and creasing depth automatically, so a mixed job does not stop between processes.
Which bed size should we choose?
Match the bed to the sheet you buy. The SG1612 cuts 1600 × 1200 mm, the SG1625 1600 × 2500 mm, the SG2132 2100 × 3200 mm and the SG3232 3200 × 3200 mm. Machine footprints are 2570 × 2080, 2570 × 3380, 3160 × 4108 and 3260 × 4080 mm, all 1415 mm high. Tell us your sheet formats and we will recommend the size.
What does it need on site?
A 380 V ±10% supply. The SG1625 draws 12 kW with two heads and 14 kW with three; the SG2132 12.2 kVA or 14.4 kVA; the SG3232 27 kVA. The SG2132 weighs 1720 kg and the SG3232 1670 kg. The SG1612 is listed at 14 kW. For the SG1612 and SG1625 weights, ask us and we will confirm them for the configuration you choose.
What materials and thicknesses can it cut?
Up to 50 mm, depending on material and tool. Sign media include ABS, PVC and PVC foam board, space board, aluminium-composite, lamp sheet, KT board, acrylic, magnetic sticker and self-adhesive vinyl. Packaging media include cardboard, corrugated, greyboard, PVC and PET, EPE and EVA, hollow sheet and honeycomb panel. Material is held by vacuum on an aluminium honeycomb bed, with zoned suction optional.
Can we put different printed jobs on the bed together?
Yes. Camera positioning registers each printed piece, and a QR-code module classifies the jobs, so several different designs can go on the bed at once and each is cut to its own file. Repeat precision is better than 0.05 mm at speeds up to 2000 mm/s.
Does it need a computer beside it?
No. It runs on an independent control platform with a touch-screen interface. Jobs arrive over Ethernet as HP-GL compatible instructions, at a software resolution selectable between 0.025, 0.01 and 0.1 mm. Protection is by an internal infrared light grid, an anti-collision design and an emergency stop.
Can it run unattended?
The SG1625 is also built with automatic loading and unloading for a fully unattended line; that configuration is listed separately as the SG1625 Autoline. On the standard tables, the optional ATC module removes the stops between tool changes within a job.