The MD-1000D Ultra is built around a 1000 × 1000 × 1000 mm working volume: a large-format, enclosed IDEX machine for full-size parts that would otherwise need to be split, joined and finished.
A lighter head, and why it shows in the surface
The redesigned extruder is 33% lighter. Less moving mass means less inertia when direction changes, so the motion system has less vibration to settle before the next line is laid down. The drive gears have also been reworked for more consistent feeding and a design life of 2.5–3 years, based on eight hours a day, five days a week.
Speed that survives the part size
The motion system runs at up to 300 mm/s with acceleration up to 10,000 mm/s², reaching 300 mm/s in 0.02 seconds. The high-flow hotend is rated at up to 40 mm³/s. MINGDA's working figures are 200 mm/s for PLA, 180 mm/s for PETG and 100 mm/s for PET-CF.
Two additional fans increase airflow by about 40%, helping the deposited material set before the next layer arrives.
It watches the print for you
The camera watches for nozzle blobs, first-layer problems, warping, spaghetti failures and foreign objects. Automatic Z-offset calibration replaces the feeler-gauge method. After a power failure, the platform lowers, the filament retracts and the job can resume from its last recorded point.
Set up once, then run it
The machine arrives factory assembled and calibrated. Validated material profiles are supplied in MINGDA's slicer, the 10-inch touchscreen replaces physical control buttons, and the mobile app provides remote monitoring and basic print control.
A worked example
MINGDA's example is an 800 × 800 × 1000 mm automotive seat in PLA-HF. At 200 mm/s, the reported print time is about nine days, compared with about 20 days in ordinary PLA at 50 mm/s. These are the manufacturer's figures.
Where it is used
Applications include automotive work, prototyping and design, functional prototyping, gas and fluid-carrying components, portrait work and medical projects.
On the floor
The machine measures 1,710 × 1,365 × 1,665 mm and draws up to 3,100 W. Shipping weight is 654.5 kg in 6.2 m³. The hotend is rated to 350 °C and the enclosed chamber to 45 °C.