AEON reflective mirror (Ø25 / Ø30)
In stock: Ø25, Ø30
- Gold-plated coating, over 96% reflectivity
- Silicon substrate with fast heat dissipation
- Recommended for high-power tubes
- Ø25 and Ø30
Silicon mirror with a gold-plated coating, over 96% reflectivity and fast heat dissipation — recommended for high-power tubes.
Request a quote- Signage & advertising
Configurations
| Configuration | Differences | Availability |
|---|---|---|
| Ø25In stock | Diameter: Ø25 mm | In stock |
| Ø30In stock | Diameter: Ø30 mm | In stock |
About this accessory
AEON gold-plated reflective mirror
In an AEON CO₂ laser, the beam travels from the tube to the cutting head over a set of mirrors. Every mirror on that path takes a share of the power, so its reflectivity and its behaviour under heat decide how much of the tube's power actually reaches the material.
This mirror uses a silicon substrate with a gold-plated coating. It reflects over 96% of the beam and sheds heat quickly, which is why it is the mirror recommended for high-power tubes, where a cheaper substrate warms up and the beam drifts.
Sizes and standard fitment
Available in Ø25 and Ø30.
- MIRA: 2 × Ø25 plus 1 × Ø20
- MIRA S and NOVA: 3 × Ø25
Fitment can differ between model generations and options, so confirm the diameter for your machine before ordering.
When to replace a mirror
A mirror that is scratched, burnt or has a damaged coating loses reflectivity and heats up further, which shows as weaker or uneven cutting. Replacing it with the original specification restores the power reaching the head; after replacement, check the beam alignment.
Technical specifications
Optics
- Substrate
- Silicon
- Coating
- Gold plated
- Reflectivity
- > 96 %
- Diameters
- Ø25 / Ø30
Compatibility
- Standard fitment, MIRA
- 2 × Ø25 + 1 × Ø20
- Standard fitment, MIRA S / NOVA
- 3 × Ø25
Specifications, images and descriptions are provided for general guidance and may change without notice. Configurations, performance figures and supplied items can vary by production batch and market. The binding specification, scope of supply and terms are those set out in the written quotation we issue for your order.
Application details
Recommended for
Replacement optics for AEON Mira and Nova machines, especially with high-power tubes.
Series
Accessories
Frequently asked questions
Which diameter does our machine use?
As standard, the MIRA uses 2 × Ø25 plus 1 × Ø20, and the MIRA S and NOVA use 3 × Ø25. This mirror comes in Ø25 and Ø30. Fitment can differ between model generations and options, so confirm the diameter for your machine before ordering. Send us the model and we will check it.
When should we replace a mirror?
When it is scratched, burnt or the coating is damaged. A damaged mirror loses reflectivity and heats up further, which shows as weaker or uneven cutting. Replacing it with the original specification restores the power reaching the head. After fitting a new mirror, check the beam alignment.
Why does a mirror affect cutting power?
The beam travels from the tube to the cutting head over a set of mirrors, and every mirror on that path takes a share of the power. Their reflectivity and their behaviour under heat decide how much of the tube's power actually reaches the material.
Why gold-plated silicon?
It reflects over 96% of the beam and the silicon substrate sheds heat quickly. That is why it is the mirror recommended for high-power tubes, where a cheaper substrate warms up and the beam drifts.