PURE-AIR PA-FVS400 Fume & Dust Extractor
SKU PA-FVS400 · On request
- 400 m³/h airflow
- Up to 8000 Pa negative pressure
- HEPA H14 filtration, 99.99% @ 0.3 µm
- Activated carbon stage for VOC and odour
- PPS standard control
Compact fume extraction unit, 400 m³/h at up to 8000 Pa. Sublimation, inkjet and UV printing - ink aerosol, VOC and odour. PPS standard control.
Request a quote- UV printing
- Sublimation
- Inkjet
- VOC & odour
About this machine
The PA-FVS400 is built for sublimation and UV printing, where the problem is not dust but ink aerosol, solvent vapour and odour. A washable foam stage catches the wet aerosol before it can reach and ruin the pleated media behind it - which is exactly what happens when a standard dust extractor is used on a printer. Behind the foam: F9, HEPA H14 and a deep activated carbon bed. 400 m³/h at up to 8000 Pa.
Filtration
- High-density open-cell foam sponge pre-filter for ink aerosol
- F9 deeppleat filter, 95% @ 1.0 um
- H14 deeppleat filter, 99.99% @ 0.3 um
- Treated activated carbon, approx. 12-30 kg, for solvent odour and VOC
Key specifications
- Airflow: 400 m³/h
- Maximum negative pressure: 8000 Pa
- Rated power: 1.0 kW
- Power supply: 90-110 V / 210-257 V, 1 ph, 50/60 Hz
- Noise level: below 60 dBA at 1 m
- Dimensions (W x D x H): 400 x 482 x 1030 mm
- Net weight: 50 kg
- Inlet: 75 / 100 mm
- Cabinet: Powder coated mild steel / brushed stainless steel
Recommended for
- Sublimation printers and calenders
- UV flatbed and roll-to-roll printers
- Solvent and eco-solvent large-format printers
Standard version (PPS)
This is the standard version, without the intelligent control package. From 15 September 2026 PURE-AIR supplies these units with a colour LCD touch screen and an upgraded control system. If the intelligent functions matter - real airflow readout, filter warnings, automatic compensation, RS-485 linkage - choose the i version of the same model.
Installation
Beside or under the printer, ducted to the print-head area or the dryer outlet. Keep the hose short. The foam stage is washable and should be checked weekly on high-volume machines - ink aerosol loads it faster than dust loads a filter.
Technical specifications
- Phase
- Single-phase
- Airflow
- 400 m³/h
- Inlet size
- 75 / 100 mm
- Net weight
- 50 kg
- Pre-filter
- High-density open-cell foam sponge pre-filter for ink aerosol
- Main filter
- H14 deeppleat filter, 99.99% @ 0.3 um
- Noise level
- 60 dB(A) max.
- Rated power
- 1 kW
- Power supply
- 90-110 V / 210-257 V, 1 ph, 50/60 Hz
- Control system
- PPS standard control
- Explosion-proof
- No
- Activated carbon
- Yes - treated activated carbon, approx. 12-30 kg
- Cabinet construction
- Powder coated mild steel / brushed stainless steel
- Dimensions (W×D×H)
- 400 x 482 x 1030 mm
- Max. negative pressure
- 8000 Pa
Application details
Recommended for
Sublimation printers and calenders; UV flatbed and roll-to-roll printers; Solvent and eco-solvent large-format printers
Materials
Sublimation, inkjet and UV printing - ink aerosol, VOC and odour
Typical working format
Small format
Control system
PPS - Pure-Air Purification System (standard control). From 15.09.2026 supplied with a colour LCD touch screen and an upgraded control system.
Installation
Beside or under the printer, ducted to the print-head area or the dryer outlet. Keep the hose short. The foam stage is washable and should be checked weekly on high-volume machines - ink aerosol loads it faster than dust loads a filter.
Series
FVS